What capacity means
Capacity is how many guests one departure can take. For a boat tour it is usually called seats. A time-slot rental works the same way: each slot is a departure, and its capacity is how many people can go out in it. It belongs to each departure, because one run can differ from another.
Capacity is the point past which the trip cannot safely or physically run.
What limits it
Three things limit capacity, and the lowest one wins:
- The boat, vehicle or venue. A boat licensed for 12 passengers takes 12, whatever demand says.
- The crew. If one guide can look after six snorkellers, a single guide caps the trip at six.
- The gear. Ten wetsuits in the right sizes means ten guests in the water.
What sets a departure's capacity, and where ItinerWiz helps
- Seats on the vehicle, boat or roomWhat it is licensed and fitted for
- Guide ratioGuests one guide can look after
- Gear availableItems per guest, such as helmets or life jackets
- Capacity: the lowest limitFor example, 12 guestsItinerWiz enforces it on every channel
- Limits per kind of guestFor example, up to 4 children
Stacked limits. The seats on the vehicle, boat or room, the guide ratio and the gear available each cap the departure. The lowest of these is the capacity, for example 12 guests. Under it, a kind of guest such as children can have its own lower limit, for example 4. ItinerWiz enforces the capacity on every channel, so the departure is never overbooked.
ItinerWizItinerWiz works out the lowest limit for each departure and enforces it on every channel: seats sold anywhere count against it, so no overbooking.
Capacity per kind of guest
Some guests need more attention or different gear. A snorkel trip might take 12 guests but only 4 non-swimmers, because each needs a flotation vest and a guide nearby. That is a limit per kind of guest, sitting under the total.
The limits for each kind should never add up to more than the departure takes. And a departure can have seats left overall but no room for one more non-swimmer. Pricing those guests is a separate question; see pricing adults and children on one tour.
Changing capacity
Capacity changes for good reasons: a larger boat steps in, an extra guide is free, a weather warning means fewer guests in the water. Two rules keep it safe:
- Raise it per departure, not across the tour, when the reason applies to one run.
- Never go below what is booked. Move or cancel bookings first.
Capacity in ItinerWiz
In ItinerWiz, the operating platform for independent experience businesses, a tour can take several kinds of guest, each with its own limit, and the kinds’ limits cannot add up to more than the tour takes. A departure’s capacity can be raised, never below the guests already booked. A booking bigger than the seats left is refused.
To keep capacity honest across phone, resellers and your website, read avoiding overbooking across channels.
Frequently asked questions
How do I work out a tour's capacity?
Take the lowest of three limits. The seats the boat or vehicle is licensed for, the guests your crew can safely look after, and the gear you have for each guest. The lowest one is your capacity.
Should capacity be the same on every departure?
Not necessarily. A bigger boat on a busy Saturday, or an extra guide, can raise one departure's capacity without changing the tour.
Can I lower capacity after bookings are taken?
You can lower it to the number already booked, not below. Below that, you would first need to move or cancel bookings.